Support
In this scenario, two PBXs located at different sites need to be interconnected through IP network, and spared extension lines are used to connect to the gateway.
1. On Routing > Routing Table page, setup the routing rules for directing call from FXO port to IP and vice versa, as follows:
2. On the > Trunk>Feature, select Second stage dialing in the inbound handle field, and select Dialing tone.
1. On Routing > Routing Table page, do the similar routing as follows.
2. On the Line > Trunk, same as we did on gateway A.
Tel:021-61202700 / 52217917
Address:5/F Block B, Building 1, No.188 Pingfu Road, Xuhui District, Shanghai 200231, China
Copyright ? New Rock Technologies, Inc. All Rights Reserved. 滬ICP備15008515號-1