Support
In this scenario, five gateways with analog PBXs are located at different sites connected on the same LAN.
1.On Routing > Routing Table page, setup the routing rules for directing call from FXO port to IP and vice versa, as follows:
2.On the Line > Trunk, select Second stage dialing in the inbound handle field, and select Dialing tone.
1.On Routing > Routing Table page, do the similar routing as follows.
2.On the Line > Trunk, same as we did on gateway A.
1.On Routing > Routing Table page, do the similar routing as follows.
2.On the Line > Trunk, same as we did on gateway A.
1.On Routing > Routing Table page, do the similar routing as follows.
2.On the Line > Trunk, same as we did on gateway A.
1.On Routing > Routing Table page, do the similar routing as follows.
2.On the Line > Trunk, same as we did on gateway A.
Tel:021-61202700 / 52217917
Address:5/F Block B, Building 1, No.188 Pingfu Road, Xuhui District, Shanghai 200231, China
Copyright ? New Rock Technologies, Inc. All Rights Reserved. 滬ICP備15008515號-1